Pelican 0370 Protector Cube Case - Foam, Black
Features
- Interior: 24.00" × 24.00" × 24.00"
- Personalized nameplate service available
- Large 2-person fold down handles
- Watertight, crushproof, and dustproof
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve - balances interior pressure, keeps
water out
- Lifetime Guarantee of Excellence
- O-ring seal
- Open cell core with solid wall design - strong, light weight
- Stainless steel hardware and padlock protectors
0370 Protector Cube Case
Pelican Protector Case
Sensitive equipment needs protection, and since 1976 the answer has been the
Pelican Protector Case. These cases are designed rugged, and travel the harshest
environments on earth. Against the extreme cold of the artic or the heat of
battle, Pelican cases have survived.
Specifications
INTERIOR (L X W X D) |
24.00" x 24.00" x 24.00" (61 x 61 x 61 cm) |
EXTERIOR (L X W X D) |
26.50" x 26.50" x 25.25" (67.3 x 67.3 x 64.1 cm) |
LID DEPTH |
5.00" (12.7 cm) |
BOTTOM DEPTH |
19.00" (48.3 cm) |
TOTAL DEPTH |
24" (61 cm) |
INT VOLUME |
8 ft³ (0.227 m³) |
WEIGHT WITH FOAM |
41.00 lbs (18.6 kg) |
WEIGHT EMPTY |
31.97 lbs (14.5 kg) |
BUOYANCY |
465.18 lbs (211 kg) |
FOAM LAYERS: |
Layer 1 (Lid): 1.90" - Pad |
|
Layer 2 (Lid): 2.00" - Convolute |
|
Layer 3 (Base): 1.00" - Pad |
|
Layer 4 (Base): 1.00" - Pad |
|
Layer 5 (Base): 4.13" - Pick N Pluck |
|
Layer 6 (Base): 4.13" - Pick N Pluck |
|
Layer 7 (Base): 4.13" - Pick N Pluck |
|
Layer 8 (Base): 4.13" - Pick N Pluck |
BODY |
Polypropylene |
LATCH |
ABS |
O-RING |
Polymer |
PINS |
Stainless Steel |
FOAM |
1.3 lb Polyurethane |
PURGE BODY |
ABS |
PURGE VENT |
3 Micron Hydrophobic Non-Woven |
MINIMUM TEMPERATURE |
-40° F (-40 ° C) |
MAXIMUM TEMPERATURE |
210° F (99 ° C) |